Soft-db Tenor 24bits Data User Guide Manual de usuario descargar pdf (Pagina 22)

Tenor Data Logger Soft dB inc.

The LEDs on the Tenor box are also useful for analyzing the saturation and low signal

level problems. The following table explains the meaning of the colour for input and output

LEDs:

LED colour description

Black Red Yellow Green

Inputs

Not used Saturated Low Level Used

Outputs

Not used --- --- Used

4.4.2 Global Indicators

The global level and the dynamic range indicators share the same tab at the bottom of the

acquisition interface.

Figure 13: Global Level indicators

The global level indicators present the calibrated global level of all activated inputs. The

scale of the indicator is automatically set by the interface following the minimum and

maximum global levels. The user can select a dB, dBA or linear display with the control at

the upper left of each global level indicator.

The input number turns red when saturation occurs on a specific input. The user can use

the Reset Sat. Indicators button to reset the saturation state (see section 4.4.1 for more

detail).

User Manual p. 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 58 59

Sin comentarios

Soft-db Tenor 24bits Data User Guide Manual de usuario Pagina 22